Mercury UV lamp for textile printing

Mon, 25 May 2026 02:22:46 +0800

We built these mercury UV lamps for one reason: to survive the brutal pace of textile printing. They’re tough, focused, and deliver that hard-hitting energy you need to instantly lock in inks and coatings—even when your line is flying. Here’s the inside scoop on what makes them work. We dialed in the power at 400V and 2500W because that’s what it takes to get the UV intensity you need for fast, reliable curing. It keeps the arc steady, and that power density gives you the punch across the whole substrate. And the 300mm length? That’s the sweet spot—designed to drop right into your existing curing station without a major overhaul. The body is made from high-purity quartz, so it handles the shock of rapid start-ups without blinking. We use a halogen fill gas to keep UV output steady over the life of the tube—no fading that leaves you with a half-baked cure. The R7s connector is straightforward and solid. It snaps in clean, transfers current reliably, and saves you from messy field wiring. On the shop floor, it’s a true drop-in replacement for standard curing modules. It keeps up with continuous cycling on PET and other synthetics, so your print line stays moving. But here’s the reality check: 2500W packs heat. Make sure your machine’s cooling system is up to the job. If it isn’t, you’ll risk overheating nearby components. Keep things cool, and this lamp keeps things running.

Textile on UV Lamp Lab

Mercury UV lamp for textile printing